Contact us
Welcome to call
13715491170
Leave us a messageMessage
Technical Support
Your location:Home ＞ News ＞ Technical SupportStorage and transportation of PC plates
Announcer:Haosu Time:2017-03-14
(1) To keep indoors, never allow direct sunlight or rain
(2) Hand stacking and stacking height of not more than two meters. No heavy objects are allowed on the board. There shall be no hard material between the plates.
(3)The storeroom shall be kept clean, dry and dust free. No other chemicals should be stored at the same time.
(4) Storage shall not damage or strip off the protective film.
(5)Transport must be flat on a clean surface area is larger than the tray on the plate, if necessary, should be properly tied to avoid vibration and sliding, pay attention to protect the edge is not damaged and the double protective film remains intact.
(2) Hand stacking and stacking height of not more than two meters. No heavy objects are allowed on the board. There shall be no hard material between the plates.
(3)The storeroom shall be kept clean, dry and dust free. No other chemicals should be stored at the same time.
(4) Storage shall not damage or strip off the protective film.
(5)Transport must be flat on a clean surface area is larger than the tray on the plate, if necessary, should be properly tied to avoid vibration and sliding, pay attention to protect the edge is not damaged and the double protective film remains intact.
Related news
- PC plate material properties2017-03-14
- Requirements for cold bending of PC boar…2017-03-14
- Sealing technology of PC board2017-03-14
- PC board installation precautions2017-03-14
- Method for mounting PC board2017-03-14